Encendido digital Motogadget M-Lock NFC

Motogadget M.Lock NFC contactless digital ignition: remote digital ignition lock that replaces the old mechanical key-operated ignition locks. When approaching within a distance of about 40mm, the associated key engages or disengages the ignition without contact: the Motogadget M.Lock NFC contactless digital ignition is based on near-field communication technology and is therefore extremely secure, tamper-proof, unlike, for example, radio remote controls. Each key is unique because of its digital code: only the correct digital code can operate the M.Lock ignition. Neither the key nor the M.Lock can wear out mechanically: switch activates a relay with a load of up to 40A, enough for any motorcycle electrical system. The hidden installation of the small lock behind non-metallic parts, such as a plastic side panel, makes it possible to completely remove the old ignition lock: clean and elegant look, especially ideal for special motorcycles! The two supplied keys are the size of a key ring, and a maximum of 125 keys can be attached per M.Lock NFC, which can be purchased as an accessory. The M.Lock NFC ignition lock has an LED on the front that indicates the various states with different colors.To protect the vehicle battery, the quiescent current is only 3.2mA when it is off, and reduces to 1.5mA after 16 hours and 0.75mA after another 8 days.

Motogadget M.Lock NFC digital ignition features:

• each key has a unique code: secure and tamper-proof NFC technology
• the contactless key activates the M.Lock and via the relay the entire vehicle electrical system
• key and M.Lock are not subject to mechanical wear and tear and do not require a battery
• thanks to indirect switching via 40A load relay, the contacts are protected from overloading
• very small and can be mounted hidden in many places: diameter 32mm, height 12mm, weight 35gr
• molded body made of Duroplast: non-flammable and 100% resistant to water and vibration (IP69)
• extremely small and lightweight keys: diameter 30mm, weight 2gr
• fixing: 1 M3 threaded socket on the back, bracket with 2 mounting holes
• operating voltage: 8-18V
• operating temperature: -20° to +80°C
• contents: Motogadget M.Lock NFC digital ignition with high quality cable clamps, no.2 keys, no.1 relay 12V,40A with flat terminals and insulating sheaths
• kit complete with detailed instructions for installation and operation
• accessories can be purchased separately: wiring ready for quick and easy installation

NOTE! It is not recommended to use M.Lock in combination with immobilizer: please check if the immobilizer can be deactivated.