Interruptor de manillar Modern izquierdo

Left side handlebar switch assembly suitable for several motorcycles models: compatible with standard handlebars diameter 22mm. Complete with 8 wires 50cm long included.This is an easy part to replace if your wires aren't running through the handlebars, if they are, it requires removing the handlebars and feeding the wires through.

Functions:

• horn with push button
• winkers with 2 static positions off
• lights 2 static positions on/off

Dimensions:

• width: 30mm
• depth: 58mm
• height: 68mm

Tip: check your wiring harness and make sure the connectors will work. It's common for the starter button's on these bikes to wear out due to arcing or they can break for various reasons: corrosion and cracked solder joints on the stock switch make for an unreliable and unsafe switch. If you use an aftermarket handlebar please make sure that wire harness is long enough.